User's Manual (1.0)

Chapter 6: Advanced Chassis Setup

6-3

6-3 Chassis Cover

Before operating the SC808 chassis for the ﬁ rst time, it is important to remove the

protective ﬁ lm covering the top of the chassis, in order to allow for proper ventilation

and cooling.

Opening the Chassis Cover (Figure 6-2))

1. Disconnect the chassis from any power source and remove all four screws.

2. Gently push down on the chassis cover in the areas indicated in the

illustration.

3. Push the cover toward the rear of the chassis

4. Lift the cover upwards and off the chassis.

Caution: Except for short periods of time, do NOT operate the server without

the cover in place. The chassis cover must be in place to allow proper airﬂ ow

and prevent overheating.

Figure 6-2. Opening the Chassis Cover

Remove this

screw

Remove this

screw

Remove this

screw