User's Manual (1.0)

6-6

SUPERSERVER 6017TR-TQF/TFF/TF User's Manual

6-7 Installing and Removing Hard Drives

Accessing the Drive Bays

SATA Drives: You do not need to access the inside of the chassis or remove power

to replace or swap SATA drives. Each hard disk drive is in a separate carrier that

may be removed to access its hard drive. Proceed to the next step for instructions.

You must use standard 1" high, SATA drives in the system.

Caution: Except for short periods of time (swapping hard drives), do not operate

the server with the carriers abscent.

Removing Hard Drive Carriers from the Chassis (Figure 6-5)

1. Press the release button on the drive carrier. This extends the drive handle.

2. Use the handle to pull the drive out of the chassis.

Figure 6-5: Removing Hard Drive