User's and BIOS Manual (1.0a)

Chapter 3: System Interface
3-1
Chapter 3
System Interface
3-1 Overview
There are several LEDs on the control panel as well as others on the SCSI drive
carriers and the serverboard to keep you constantly informed of the overall status
of the system as well as the activity and health of specific components. There
are also two buttons on the chassis control panel.
3-2 Control Panel Buttons
There are three push-button buttons located on the front of the chassis. These
are (in order from left to right) a mute, a reset and a power on/off button.
z MUTE: Depress the mute button to silence the buzzer alarm, which is
activated by a signal received from the SCSI drive backplane. After silencing the
alarm, you should then press the button again to reactivate the alarm function.
z RESET: Use the reset button to reboot the system.
MUTE