User's and BIOS Manual (1.0a)

Chapter 4: System Safety
4-1
Chapter 4
System Safety
4-1 Electrical Safety Precautions
!
Basic electrical safety precautions should be followed to protect yourself from
harm and the SuperServer 6034H-X8R from damage:
z Be aware of the locations of the power on/off switch on the chassis as well
as the room's emergency power-off switch, disconnection switch or
electrical outlet. If an electrical accident occurs, you can then quickly
remove power from the system.
z Do not work alone when working with high voltage components.
z Power should always be disconnected from the system when removing or
installing main system components, such as the serverboard, memory
modules and the CD-ROM and floppy drives. When disconnecting power,
you should first power down the system with the operating system and
then unplug the power cords of all the power supply units in the system.
z When working around exposed electrical circuits, another person who is
familiar with the power-off controls should be nearby to switch off the power
if necessary.
z Use only one hand when working with powered-on electrical equipment. This
is to avoid making a complete circuit, which will cause electrical shock.
Use extreme caution when using metal tools, which can easily damage
any electrical components or circuit boards they come into contact with.
z Do not use mats designed to decrease electrostatic discharge as protection
from electrical shock. Instead, use rubber mats that have been specifically
designed as electrical insulators.
z The power supply power cord must include a grounding plug and must be
plugged into grounded electrical outlets.