User's and BIOS Manual (1.0a)

5-18
SUPERSERVER 6034H-X8R Manual
LAN Enable/Disable
Change the setting of jumper JPL1
to enable or disable the onboard
LAN ports (JLAN1 and JLAN2) on
the serverboard. See the table on
the right for jumper settings. The
default setting is enabled
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
JLAN
Enable/Disable
Jumper Settings
(JPL1)
SCSI Controller Enable/
Disable
Jumper JPA1 allows you to enable or
disable the SCSI headers. The de-
fault setting is pins 1-2 to enable all
four headers. See the table on the
right for jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
SCSI Enable/Disable
Jumper Settings
(JPA1)
SCSI Termination Enable/
Disable
Jumpers JPA2 and JPA3 allow you to
enable or disable termination for the
SCSI connectors. Jumper JPA2 con-
trols SCSI channel A and JPA3 is for
channel B. The default setting is open
to enable (terminate) both SCSI chan-
nels.
Note: In order for the SCSI drives to
function properly, please do not
change the default setting set by the
manufacturer. See the table on the
right for jumper settings.
Jumper
Position
Open
Closed
Definition
Enabled
Disabled
SCSI Channel Termination
Enable/Disable
Jumper Settings
(JPA2, JPA3)