User's and BIOS Manual (1.0a)

Chapter 5: Advanced Serverboard Setup
5-21
5-11 Floppy/Hard Disk Drive and SCSI Connections
Note the following when connecting the floppy and hard disk drive cables:
• The floppy disk drive cable has seven twisted wires.
• A red mark on a wire typically designates the location of pin 1.
• A single floppy disk drive ribbon cable has 34 wires and two connectors
to provide for two floppy disk drives. The connector with twisted wires
always connects to drive A, and the connector that does not have
twisted wires always connects to drive B.
5-10 Onboard Indicators
LAN1/LAN2 LEDs
Each of the Ethernet ports (located
beside the VGA port) have two
LEDs. The yellow LED indicates
activity while the other LED may be
green, orange or off to indicate
the speed of the connection. See
the table on the right for the func-
tions associated with this second
LED.
LED
Color
Off
Green
Orange
Definition
No Connection
100 MHz
1 GHz
GLAN Connection
LED Indicator