User`s manual
SC825 Chassis Manual
5-2
5-3 Removing the Chassis Cover
Removing the Chassis Cover
Remove the two screws on each side of the cover, which secure the cover to 1.
the chassis.
Press the release tabs to remove the cover from the locked position. Press 2.
both tabs at the same time.
Once the top cover is released from the locked position, slide the cover 3.
toward the rear of the chassis.
Lift the cover off the chassis.4.
Warning: Except for short periods of time, do NOT operate the
server without the cover in place. The chassis cover must be in
place to allow proper airow and prevent overheating.
Figure 5-1: Removing the Chassis Cover
Release
Tab
Remove
Screw
Remove
Screw
!
2
1
1
1
1
2
3
4