User`s manual

5-11
Chapter 5: Chassis Setup and Maintenance
Add-on Card/Expansion Slot Setup
SC825: chassis include I/O slots for add-on cards and expansion cards. The number
of cards you can use depends on your chassis model.
SC825 LP: Provides 7 low prole add-on card slots.
SC825U: Provides 3 full height/full length and 3 low prole card slots through a
user dened universal expansion card.
Figure 5-11: SC825 LP model
Add-onCard/ExpansionSlotSetupinLP(LowProle)
Chassis
SC825 chassis include slots for add-on cards and expansion cards. The number of
cards you can use depends on your chassis model and motherboard model.
Installing Add-on and Expansion cards in SC825LP (Low Prole) Chassis
1. Disconnect the power supply, lay the chassis on a at surface, and open the
chassis cover.
2. Remove the screw holding the cover in place for each low prole add-on/ex-
pansion card slot you want to use. Keep this screw for later use.
3. Connect the add-on cards and/or expansion cards to the mother board.
4. Secure each card to the chassis using the card's L bracket and the screw
previously removed.
Add-on/
Expansion
Card Slots