SUPERSERVER User's Manual

Chapter 5: Advanced Serverboard Setup

5-9

5-7 Adding PCI Cards

1. 64-bit PCI-X slot

The 6015T-T/6015T-INF includes two preinstalled riser cards designed speciﬁ cally

for use in the SC808T-980 1U rackmount chassis. These riser cards support two

low-proﬁ le PCI-Express x8 cards to ﬁ t inside the chassis.

2. PCI card installation

The riser card has already been preinstalled into the serverboard. Perform the

following steps to add a PCI add-on card:

1. Remove the PCI slot shield on the chassis by releasing the locking tab.

2. Insert the add-on card into the riser card.

3. Secure the add-on card with the locking tab.