User`s manual

7-18

SUPERSERVER 6018R-WTR(T) USER'S MANUAL

SOL (Serial_Over_LAN) Device Mode

Use this feature to select the desired mode for the SOL port. The options are

Normal and High Speed.

Serial Port 2 Attribute

Use this feature to select the attribute for serial port 2. The options are SOL

(Serial_On_LAN), and COM.

Device Mode

Use this feature to select the desired mode for a serial port speciﬁ ed. The options

are Normal and High Speed.

Serial Port Console Redirection

These submenus allow the user to conﬁ gure the following Console Redirection

settings for a COM Port 1 or COM Port 2 as speciﬁ ed by the user.

COM 1/SOL (Serial-Over-LAN)

COM1/SOL Console Redirection

Select Enabled to use COM Port1 or SOL Port for Console Redirection. The options

are Enabled and Disabled. If this feature is set to enabled, the following items will

display.

Console Redirection Settings

This feature allows the user to specify how the host computer will exchange

data with the client computer, which is the remote computer used by the user.

Terminal Type

This feature allows the user to select the target terminal emulation type for

Console Redirection. Select VT100 to use the ASCII character set. Select

VT100+ to add color and function key support. Select ANSI to use the extended

ASCII character set. Select VT-UTF8 to use UTF8 encoding to map Unicode

characters into one or more bytes. The options are VT100, VT100+, VT-UTF8,

and ANSI.

Bits Per Second

This item sets the transmission speed for a serial port used in Console

Redirection. Make sure that the same speed is used in the host computer and the

client computer. A lower transmission speed may be required for long and busy

lines. The options are 9600, 19200, 38400, 57600, and 115200 (bits per second).