User`s manual

Chapter 1
Introduction
1-1 Overview
The SuperServer 6018R-WTR(T) is a high-end server comprised of two main
subsystems: the SC815TQ-R706WB 1U server chassis and the X10DRW-i(T) dual
processor serverboard. Please refer to our web site for information on operating
systems that have been certifi ed for use with the system (www.supermicro.com).
In addition to the serverboard and chassis, various hardware components have
been included with the SuperServer 6018R-WTR(T) as listed below:
• One (1) SC815/113/116 Intel DP X9, X8 PC air shroud (MCP-310-19002-0N)
• One (1) 70-cm round 20-to-20-pin Front Panel Control Cable (CBL-0335L)
• Heatsinks:
One (1) 1U Passive CPU Heatsinks (SNK-P0047PSC OR SNK-P0057PSC)
One (1) 1U Passive CPU Heatsinks (SNK-P0057PS)
• Fans:
Four (4) 40x56mm 4-pin PWM chassis middle fans (FAN-0086L4)
One (1) 40x56mm 4-pin PWM chassis middle fan (MCP-340-00022-0N)
• IDE Accessories
One (1) Mini-IDE to IDE adapter for optional DVD (MCP-420-81501-IN)
One (1) 50-cm IDE 80-wire cable for DVD ROM, 30AWG cable (CBL-0139L)
One (1) 8-cm FDD DVD 4-pin power adapter cable 24AWG (CBL-0210L)
• SATA Accessories
One (1) HD backplane (BPN-SAS-815TQ-O-P)
One (1) 40-cm 8-pin to 8-pin round 28AWG cable (CBL-CDAT-0661)
One (1) set of 4 SATA 56/45.5/35/23-cm round 26AWG cable (CBL-0186L)
Four (4) hot-swap 3.5" hard-disk drive trays (MCP-220-00075-0B)
• One (1) riser card (RSC-R1UW-2E16-O-P)
• One (1) rail set for 1U (MCP-290-00054-0N)
Chapter 1: Introduction
1-1