User`s manual

7-30

SUPERSERVER 6018R-WTR(T) USER'S MANUAL

Save Changes and Reset

When you have completed the system conﬁ guration changes, select this option to

save the changes and reboot the computer so that the new system conﬁ guration

settings can take effect. Select Save Changes and Exit, and press <Enter>. When

the dialog box appears, asking you if you want to exit the BIOS setup without saving,

select Yes to quit BIOS without saving the changes, or select No to quit the BIOS

and save changes.

Save Options

Save Changes

Select this option and press <Enter> to save all changes you've done so far and

return to the AMI BIOS utility Program. When the dialog box appears, asking you

if you want to save conﬁ guration, select Yes to save the changes, or select No to

return to the BIOS without making changes.

Discard Changes

Select this feature and press <Enter> to discard all the changes and return to the

BIOS setup. When the dialog box appears, asking you if you want to load previous

values, select Yes to load the values previous saved, or select No to keep the

changes you've made so far.

Restore Optimized Defaults

Select this feature and press <Enter> to load the optimized default settings that

help optimize system performance. When the dialog box appears, asking you if you

want to load optimized defaults, select Yes to load the optimized default settings,

or select No to abandon optimized defaults.

Save as User Defaults

Select this feature and press <Enter> to save the current settings as the user's

defaults. When the dialog box appears, asking you if you want to save values as

user's defaults, select Yes to save the current values as user's default settings, or

select No to keep the defaults previously saved as the user's defaults.

Restore User Defaults

Select this feature and press <Enter> to load the user's defaults previously saved in

the system. When the dialog box appears, asking you if you want to restore user's

defaults, select Yes to restore the user's defaults previously saved in the system,

or select No to abandon the user's defaults that were previously saved.