User`s manual

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6018R-WTR(T).
Installation and maintenance should be performed by experienced technicians only.
The SuperServer 6018R-WTR(T) is a 1U rackmount server based on the
SC815TQ-R706WB server chassis and the X10DRW-i(T) serverboard. The
SuperServer 6018R-WTR(T) system's WIO platform has major advantages over
E-ATX/ATX platforms in small form factor 1U and 2U systems by increasing I/O
performance by use of multiple full-height, full-length add-on cards. Please refer to
our web site for updates on supported processors.
The only difference between the 6018R-WTR and 6018R-WTRT servers is that
the 6018R-WTR use 1Gps dual LAN ports and the 6018R-WTRT uses 10Gps dual
LAN ports.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X10DRW-i(T) serverboard
and the SC815TQ-R706WB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6018R-WTR(T)
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without the processor and memory components, this
chapter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6018R-WTR(T).
iii
Preface