User`s manual

Chapter 5: Advanced Serverboard Setup

5-7

Caution: You can only install the CPU to the socket in one direction. Make sure

that the CPU is properly inserted into the socket before closing the load plate. If it

doesn't close properly, do not force it as it may damage your CPU. Instead, open

the load plate again and double-check that the CPU is aligned properly.

7. With the CPU in the socket,

inspect the four corners of the

CPU to make sure that they are

ﬂ ush with the socket.

8. Close the load plate. Lock the

lever labeled 'Close 1st', then lock

the lever labeled 'Open 1st'. Use

your thumb to gently push the

load levers down until the lever

locks.

OPEN 1st

OPEN

1st

Lever Lock

Push down

and lock the

lever labeled

'Open 1st'.

OPEN 1st

OPEN

1st

Push down and lock the

level labeled 'Close 1st'.

Gently close

the load plate.

9. Repeat steps to install to the

remaining CPU socket.