User`s manual
5-18
SUPERSERVER 6018R-WTR(T) USER'S MANUAL
Universal Serial Bus (USB)
Four USB 3.0 ports (USB 0/1, USB
2/3) are located on the I/O backpanel.
In addition, an internal USB header,
located next to S-SATA0, also provides
two USB 3.0 connections (USB 4/5) for
front panel support. (Cables are not
included). See the tables on the right
and below for pin defi nitions.
BP USB (3.0) 0/1, 2/3
Pin Defi nitions
Pin# Description
1 VBUS
2 SSRX-
3 SSRX+
4 Ground
5 SSTX-
6 SSTX+
7 GND_DRAIN
8D-
9D+
Front Panel USB (3.0) 4/5
Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 +5V 2 +5V
3 USB_PN2 4 USB_PN3
5 USB_PP2 6 USB_PP3
7 Ground 8 Ground
9 Key 10 Ground
TPM/Port 80 Header
A Trusted Platform Module/Port 80
header, located at JTPM1, provides
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See
the table on the right for pin defi nitions.
Trusted Platform Module Header
Pin Defi nitions (JTPM1)
Pin# Defi nition Pin# Defi nition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2