User`s manual

Chapter 6: Advanced Chassis Setup
6-9
Storage Module
If the 7046T-3R is to be used in a rack confi guration, you must turn the storage
module 90 degrees. This can be done before, during, or after setup.
Rotating the Storage Module
Open the chassis cover.1.
Disconnect any cables from the storage module to any components in the 2.
chassis.
Push the storage module release lever to unlock the storage module.3.
Grasp the external edges of the storage module and pull it from the chassis.4.
Turn the storage module 90 degrees (as illustrated).5.
Reinsert the module into the chassis and reconnect the cords.6.
Storage Module
Release Lever
Storage Module
Figure 6-7. Rotating the Storage Module