User`s manual

C-6

UPERSERVER 8045C-3R User's Manual

Creating a RAID 10 (RAID 1+ RAID 0)

Select "Create RAID Volume" from the main menu and press the <Enter> key.

The following screen will appear:

Specify a name for the RAID 10 set and press <Enter>.

When "RAID Level" item is highlighted, use the <Up Arrow> <Down Arrow>

keys to select RAID 10 (RAID1 + RAID0) and hit <Enter>.

When "Stripe Size" is highlighted, use the <Up Arrow> <Down Arrow> keys to

select the stripe size from 4 KB to 128 KB for your RAID 10 and hit <Enter>.

The default setting is 64 KB. Note: For a server, please use a lower stripe

size, and for a multimedia system, use a higher stripe size.

When the "RAID Volume Capacity" item is highlighted, enter your RAID

volume capacity and hit <Enter>. The default setting is the maximum capacity

allowed.

Press <Enter> when the "Create Volume" item is highlighted. A warning mes-

sage displays.

When asked "Are you sure you want to create this volume (Y/N)?", press <Y>

to create the RAID volume or <N> to go back to the Create Volume menu.