User`s manual
7-18
SuperWorkstation 5037A-I User's Manual
Fan 1 ~ Fan 4, Fan A Speed
This feature displays the fan speed readings from fan interfaces Fan1 through
Fan4 and FanA.
VCORE, 12V, VDIMM, 5VCC, CPU VTT, AVCC, 3.3VCC, VSB, VBAT
This feature displays the current voltages of the above voltage monitors.
ACPI Settings
Use this feature to congure Advanced Conguration and Power Interface (ACPI)
power management settings for your system.
ACPI Sleep State
This setting allows you to congure the ACPI (Advanced Conguration and Power
Interface) sleep state for your system when it is in the Suspend mode. The options
are Suspend Disabled, S1 (CPU Stop Clock), and S3 (Suspend to RAM). S3
(Suspend to RAM) is the deepest sleep state in these options.
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
Trusted Computing
TPM Support
Select Enable to activate BIOS support for trusted platforms (TPM 1.1/1.2) and al-
low the BIOS to automatically download the drivers needed to provide support for
the platforms specied. The options are Disable and Enable.
TPM State
This feature changes the TPM State. The options are Disabled and Enabled. Note:
The system will restart to change the TPM State.