User`s manual

Chapter 6: Advanced Chassis Setup

6-11

Installing the Front Cooling Fan (Optional)

1. Disconnect all power to the chassis.

2. Insert the four rubber pins through the front fan bracket and into the mounting

holes in the front fan.

3. Pull the rubber pins through the mounting holes of the system fan to secure

the fan to the chassis.

4. Lower the fan into the chassis, aligning the holes at the top of the front fan

bracket with the holes in the chassis.

5. Secure the fan to the chassis using the two screws provided.

6. Connect the fan cable to the serverboard.

Figure 6-10. Installing the Front Cooling Fan (Optional)