User Manual

5038AD-I User's Manual
1-2
1-2 Motherboard Features
At the heart of the system 5038AD-I lies the C7X99-OCE, a single processor
motherboard based on the Intel X99 Express chipset. Below are the main features
of the C7X99-OCE. (See Figure 1-1 for a block diagram of the chipset).
Processors
The C7X99-OCE supports a single Intel
®
processor in an Intel LGA 2011-3 (R3)
socket. With the Intel X99 Express chipset built in, the C7X99-OCE motherboard
offers substantial system performance and storage capability for overclocking
platforms in a sleek package. Please refer to our website (http://www.supermicro.
com/products/) for processor and memory support updates.
Other chipset features include:
• Direct Media Interface (up 10 Gb/s transfer, Full Duplex)
• Intel® Matrix Storage Technology and Intel Rapid Storage Technology
• Dual NAND Interface
• Intel I/O Virtualization (VT-d) Support
• Intel Trusted Execution Technology Support
• PCI Express 3.0 Interface (up to 8 GT/s)
• SATA Controller (up to 6Gb/sec)
• Advanced Host Controller Interface (AHCI)
Memory
The C7X99-OCE has eight (8) DIMM slots that can support up to
64GB of unbuffered, non-ECC UDIMM (1 GB, 2 GB, 4GB and 8GB size)
DDR4 2133~3000(OC) MHz speed SDRAM. See Chapter 5 for details.
SATA
A SATA controller is integrated into the chipset to provide a SATA3 subsystem that
supports six (6) I-SATA (I-SATA 0~5) and four (4) S-SATA (S-SATA0~3) SATA 3.0
(6Gb/s) ports. RAID 0, 1, 5, and 10 is supported by the I-SATA ports, but not by
the S-SATA ports.
PCI Expansion Slots
The C7X99-OCE has the following available expansion ports on the motherboard:
• Four (4) PCI Express 3.0 x16s (run at 16/16/NA/8 or 16/16/8/8)
• Two (2) PCI Express 2.0 x1 (in x4) slots