User Manual

4-38
5038AD-I User's Manual
EHCI1
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #1 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
EHCI2
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
PCH-FW (Firmware)
The following information for the PCH Firmware.
ME FW Version - displays the Management Engine version number.
ME Firmware Mode - displays the Management Engine mode.
ME Firmware Type - displays the Management Engine rmware type.
ME Firmware SKU - displays the Management Engine SKU size.
ME FW Image Re-Flash
This item will update the PCH Firmware from an omage in a USB Flashdrive
attached to a USB port. The options are Enabled and Disabled.