User Manual

4-54
5038AD-I User's Manual
Flow Control
Use this item to set the fl ow control for Console Redirection to prevent data
loss caused by buffer overfl ow. Send a "Stop" signal to stop data-sending when
the receiving buffer is full. Send a "Start" signal to start data-sending when
the receiving buffer is empty. The options are None, Hardware RTS/CTS, and
Software Xon/Xoff.
The setting for each these features is displayed:
Data Bits, Parity, Stop Bits
7-11 IPMI
Use this feature to confi gure Intelligent Platform Management Interface (IPMI)
settings.
IPMI
The following will be displayed:
• IPMI Firmware Revision - This item indicates the IPMI fi rmware revision
used in your system.
• IPMI Status - This item indicates the status of the IPMI fi rmware installed
in your system.