Manualshelf

User Manual

ManualsBrandsSupermicro ManualsComputers & AccessoriesSupermicro 5038AD-I Intel X99 Chipset LGA 2011 R3 Core i7 Extreme Edition, Broadwell-E, Xeon E5 v3/v4, DDR4 Enthusiast Gaming Desktop Barebone PC
41424344454647484950
5-4
5038AD-I User's Manual
5-4 Processor and Heatsink Installation
Attention! When handling the processor package, avoid placing
direct pressure on the label area of the fan.
Important:
Always connect the power cord last, and always remove it before
adding, removing or changing any hardware components. Make
sure that you install the processor into the CPU socket before
you install the CPU heatsink.
If you buy a CPU separately, make sure that you use an Intel-
certifi ed multi-directional heatsink only.
Make sure to install the system board into the chassis before
you install the CPU heatsink.
When receiving a motherboard without a processor pre-installed,
make sure that the plastic CPU socket cap is in place and none
of the socket pins are bent; otherwise, contact your retailer
immediately.
Refer to the Supermicro website for updates on CPU support.
Installing the Processor
OPEN 1st
OP
EN 1st
IMPORTANT!
1. Using your thumb and the index fi nger, remove the 'WARNING' plastic cap
from the socket.