User Manual

5-28
5038AD-I User's Manual
5-11 SATA Connections
SATA Connections
Ten Serial ATA (SATA) 3.0 connectors
(I-SATA0~5, S-SATA0~3) are
supported on the board. All SATA
3.0 ports are supported by the Intel
X99 PCH chip. RAID 0,1,5,10 are
supported on I-SATA 0~5. These high
speed ports support transfer rates of
up to 6Gb/s. See the table on the right
for pin defi nitions.
SATA 3.0 Connectors
Pin Defi nitions
(I-SATA0~5, S-SATA0~3)
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
Status Display (LED4)
LED4 is made up of two alpha-numeric
displays that will display a status or
POST code, when the motherboard
is powered on. Please download
the following AMI publication for a
complete list of POST codes:
http://www.ami.com/support/doc/ami_
aptio_4.x_status_codes_pub.pdf
Note: This feature is for the C7X99-
OCE motherboard only.
+
LED4
JWD1:
1-2:RST
WATCH DOG
PWR LED:PIN 1-3
JD1: SPEAKER:PIN 4-7