User Manual

Chapter 6: Advanced Chassis Setup
6-3
Left Side and Right Side Covers
Removing a Side Chassis Cover
1. Power down the system as described in section 6-2.
2. Remove the two thumb screws on the rear of the chassis.
3. Slide the cover back toward the rear of the chassis.
Figure 6-2. Removing the Chassis Side Covers
1
3
1
6
2
2
1
5
Front Bezel
Remove the front bezel by pulling it off from the bottom of the bezel. This should
only be necessary when replacing the front fans.
Figure 6-3. Removing the Front Bezel