User Manual

Chapter 6: Advanced Chassis Setup

6-5

3. Push the drive tray toward the front of the chassis and out.

4. Slide the DVD drive into the chassis until it clicks into place.

Installing a Storage Device in the 5.25" Drive Tray

You can install a 3.5" drive, one or two 2.5" disk drives or solid state drives.

1. Open the chassis left side cover.

2. Locate and press the release tab (Figure 6-5) for the drive tray in which you

want to place the drive.

Figure 6-5. Release Tabs for the Drive Tray

Release Tab

Figure 6-6. Storage Device Conﬁ gurations for 5.25" Bays

Optional Bracket

(MCP-220-00044-ON)

for Two 2.5" Drives