User Manual

4-2
5038AD-I User's Manual
Except for the Home screen you may press the <F1> on any screen under the
Setup Section to see a list of Hot Keys that are available.
How To Change the Confi guration Data
The confi guration data that determines the system parameters may be changed
by entering the AMI BIOS GUI Setup utility. This Setup utility can be accessed by
pressing <Del> at the appropriate time during system boot.
Note: For the purposes of this manual, options that are printed in Bold are default
settings.
How to Start the Setup Utility
Normally, the only visible Power-On Self-Test (POST) routine is the memory test.
As the memory is being tested, press the <Delete> key to enter the main menu of
the AMI BIOS GUI Setup Utility. From the Setup Home screen, you can access the
other Setup Sections.
The AMI BIOS GUI Setup Utility uses a mouse pointer navigation system similar
to standard graphical user interfaces. Hover and click an icon to select a section,
click a down arrow to select from an options list.