Datasheet

B-8

UPERSERVER 6014H-32 User’s Manual

Assigning Array Properties

Once you've create a new array, you are ready to assign the properties to the array.

Caution: Once the array is created and its properties are assigned, you cannot

change the array properties using the ACU. You will need to use the Adaptec Stor-

age Manager - Browser Edition. (Refer to Adaptec's User's Guide in the enclosed

CD.)

To assign properties to the new array:

1. In the Array Properties menu (as shown in the screen below), select an array

type and press Enter.

Note that only the available array types: RAID 0, and RAID1, are displayed on the

screen. (*RAID 0 or RAID 1 requires two drives.

2. Under the item "Arrays Label", type in an label and press Enter. (The label

shall not be more than 15 characters.