Datasheet

Appendix B: Software Installation
B-23
4. Use the arrow keys to select an item. Then, press <Enter> and the arrow keys to
confi gure the setting for the item selected.
5. To load the default settings, press <F6>. Note: The default setting for each item
is listed below:
Runtime BIOS: Enabled,
BBS Support: Device,
POST Banner Display: Enabled,
CTRL-A Message Display: Enabled,
Physical Drives Display during POST: Enabled,)
6. Press <Esc> to return to the previous menu and to exit the utility.
To set the controller confi guration:
3. Select "Controller Confi guration" and press <Enter> to access the submen as
shown below: