Datasheet

SUPERSERVER 6014H-32 User's Manual
1-2
1-2 Serverboard Features
At the heart of the SuperServer 6014H-32 lies the X6DHR-3G2 a dual Xeon pro-
cessor serverboard designed to provide maximum performance. Below are the
main features of the X6DHR-3G2. See Figure 1-1 for a system block diagram of
the chipset.
Processors
The X6DHR-3G2 supports single or dual 604-pin Intel Xeon processors of up to
3.60 GHz at an 800 MHz FSB. Please refer to our web site for a complete listing
of supported processors.
Memory
The X6DHR-3G2 has eight 240-pin DIMM slots that can support up to 16 GB of
DDR2-400 SDRAM. The dual-channel memory bus requires memory modules
to be installed two at a time.
Serial Attached SCSI/Serial ATA
An Adaptec 9410W SAS/SATA controller is integrated into the X6DHR-3G2 to
provide a four-port Serial Attached SCSI/Serial ATA subsystem, which supports
RAID levels 0 and 1, 10 and JBOD. The X6DHR-3G2 also has a slot for a LP
ZCR daughter card (AOC-SOZCR1) to supply ZCR function. The use of a ZCR
card in this slot will also provide RAID 5 support.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS/SATA drives.
PCI Expansion Slots
Two riser cards have been included with the server to support PCI expansion.
The CSE-RR1U-X riser fi ts into the 133 MHz PCI-X slot on the X6DHR-3G2 to
support a standard size (full-height, full-length) PCI-X add-on card (any speed).
The CSE-RR1U-XLP fi ts into the 100 MHz PCI-X slot to support one low profi le
(half-height, half-length) PCI-X add-on card (of either 100 or 66 MHz).
An additional two riser cards are available as an option to support add-on cards
in the SXB x8 PCI-E slots (CSE-RR1U-EL and CSE-RR1U-ELP).