Datasheet

2-6

UPERSERVER 6014H-32 User's Manual

Figure 2-3. Installing the Server into a Rack

Installing the Server into the Rack

You should now have rails attached to both the chassis and the rack unit. The

next step is to install the server into the rack. Do this by lining up the rear of the

chassis rails with the front of the rack rails. Slide the chassis rails into the rack

rails, keeping the pressure even on both sides (you may have to depress the lock-

ing tabs when inserting). See Figure 2-3.

When the server has been pushed completely into the rack, you should hear the

locking tabs "click". Finish by inserting and tightening the thumb screws that hold

the front of the server to the rack.