Datasheet

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It pro-
vides information for the installation and use of the SuperServer 6014H-32. Instal-
lation and maintainance should be performed by experienced technicians only.
The SuperServer 6014H-32 is a high-end 1U rackmount server based on the
SC813T-500 1U rackmount server chassis and the X6DHR-3G2 serverboard, which
supports single or dual Intel® Xeon™ processors of up to 3.60 GHz at a Front Side
(system) Bus speed of 800 MHz and up to 16 GB of DDR2-400 SDRAM memory.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the SUPER X6DHR-3G2 serverboard
and the SC813T-500 chassis, which make up the SuperServer 6014H-32.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6014H-32 into
a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface