Datasheet

5-8
S
UPERSERVER 6014H-32 User’s Manual
5-6 Adding PCI Cards
1. PCI slots
The 6014H-32 can accommodate add-on cards in both the PCI-X 133 MHz and
the PCI-X 100 MHz slot with the use of two riser cards, which are included with
the system: the CSE-RR1U-X riser supports a standard size card in slot #6 and the
CSE-RR1U-XLP riser supports a low profi le card in slot #7).
An additional two riser cards are available as an option to support add-on cards
in the SXB-E1 and SXB-E2 x8 (PCI-Express) slots: the CSE-RR1U-EL riser (for
a standard size card) and the CSE-RR1U-ELP (for a low profi le card).
2. PCI card installation
Before installing a PCI add-on card, make sure you install it into the correct riser
card. Begin by releasing the locking tab that corresponds to the slot you wish to
populate. Insert the expansion card into the correct riser card, pushing down with
your thumbs evenly on both sides of the card.