Datasheet

7-4

UPERSERVER 6014H-32 User's Manual

Legacy Diskette A

This setting allows the user to set the type of ﬂ oppy disk drive installed as diskette A.

The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5 in, 1.44/1.25MB,

3.5 in and 2.88MB 3.5 in.

Parallel ATA

This setting allows the user to enable or disable the function of Parallel ATA. The

options are Disabled, Channel 0, Channel 1 and Both.

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and Enabled.

Serial ATA RAID Enable

Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS

environment, use the RAID driver if this feature is set to "Enabled". If "disabled",

use the "Non-RAID" driver.)

Native Mode Operation

This option allows the user to select the Native Mode for ATA. Some Operating

Systems are not supported by the Native Mode. The options are: Serial ATA,

Parallel ATA, Auto, and Both.

IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE

Channel 2 Master, IDE Channel 3 Master

These settings allow the user to set the parameters of IDE Channel 0 Master/

Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master

slots. Hit <Enter> to activate the following sub-menu screen for detailed options

of these items. Set the correct conﬁ gurations accordingly. The items included in

the sub-menu are:

Type

This option allows the user to select the type of IDE hard drive. The options are

Auto (allows BIOS to automatically determine the hard drive's capacity, number

of heads, Sectors, Maximum Capacity, LBA Format, ect.). Enter a number from

1-39 to select a predetermined type of hard drive, CD-ROM and ATAPI Removable.

The option- "User" will allow the user to enter the parameters of the HDD installed

at this connection. The option-"Auto" will allow BIOS to automatically conﬁ gure

the parameters of the HDD installed at the connection. Choose the option"1-39"