Datasheet

7-10

UPERSERVER 6014H-32 User's Manual

Enable Master

This setting allows you to enable the selected device as the PCI bus master.

The options are Enabled and Disabled.

Latency Timer

This setting allows you to set the clock rate for Bus Master.A high-priority, high-

throughout device may beneﬁ t from a greater Clock rate. The options are Default,

0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novell and

other Operating Systems, please select the option: "other". If a drive fails after

the installation of a new software , you might want to change this setting and

try again. Different OS requires different Bus Master clock rate.

Large Disk Access Mode

This setting determines how large hard drives are to be accessed. The options are

DOS or Other (for Unix, Novellle NetWare and other operating systems).

Advanced Chipset Control

Access the submenu to make changes to the following settings.

Force Compliance Mode Entry

This feature allows you to enable the PCI-Express Compliance 1.0 Mode. The

options are: Disabled or Enabled.

Memory RAS Feature Control

Select this option to enable the Memory RAS Feature Control. The options are

Standard, Sparing, and Mirroring.

Clock Spectrum Feature

If "Enabled", BIOS will monitor the level of Electromagnetic Interference caused by

the components and will attempt to decrease the interference whenever needed.

The options are Enabled and Disabled.

Memory Remap Function Control

Set to Enabled to re-allocate memory resources for PCI slots. The options are

Enabled and Disabled.

DRAM Data Integrity Mode

If enabled, this feature allows the data stored in the DRMA memory to be integrated

for faster data processing. The options are 72-bit ECC, 144-bit ECC, Auto and

Disabled.