Datasheet

7-14
S
UPERSERVER 6014H-32 User's Manual
DMI Event Logging
Access the submenu to make changes to the following settings.
Event Log Validity
This is a display, not a setting, informing you of the event log validity.
Event Log Capacity
This is a display, not a setting, informing you of the event log capacity.
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Event Logging
This setting allows you to Enable or Disable event logging.
ECC Event Logging
This setting allows you to Enable or Disable ECC event logging.
Mark DMI Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI Event Logs
Select Yes and press <Enter> to clear all DMI event logs. The options are Yes
and No.
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
Specifi es to redirect the console to On-board COM A or On-board COM B. This
setting can also be Disabled.
BAUD Rate
Select the BAUD rate for console redirection. The options are 300, 1200, 2400,
9600, 19.2K, 38.4K, 57.6K and 115.2K.
Console Type
Choose from the available options to select the console type for console redirection. The
options are VT100, VT100,8bit, PC-ANSI, 7bit, PCANSI, VT100+,
VT-UTF8.
Flow Control
Choose from the available options to select the fl ow control for console redirection.
The options are: None, XON/XOFF, and CTS/RTS.