Datasheet

Appendix B: Software Installation

B-7

Creating Arrays

Before creating arrays, make sure the disks for the array are connected and

installed in your system. Note that disks with no usable space, or disks that are un-

initialized are shown in gray and cannot be used. See

Initializing Disk Drives.

To create an array:

1. Turn on your computer and press Ctrl+A when prompted to access the ARC

utility.

2. From the ARC menu, select Array Conﬁ guration Utility Main Menu (ACU) (as

shown on the ﬁ rst screen on page B-5).

3. From the ACU menu, select Create Array.

4. Select the disks for the new array and press Insert (as the screen shown below).

Note: To deselect any disk, highlight the disk and press Delete.

5. Press Enter when both disks for the new array are selected. The Array Proper-

ties menu displays (as the screen shown below).