User`s manual

SUPERSERVER 6014P-32/6014P-32R User's Manual
1-2
1-2 Serverboard Features
At the heart of the SuperServer 6014P-32/6014P-32R lies the X6DHP-3G2 a dual
Xeon processor serverboard designed to provide maximum performance. Below
are the main features of the X6DHP-3G2. See Figure 1-1 for a system block
diagram of the chipset.
Processors
The X6DHP-3G2 supports single or dual 604-pin Intel Xeon processors of up to
3.60 GHz at an 800 MHz FSB. Please refer to our web site for a complete listing
of supported processors.
Memory
The X6DHP-3G2 has eight 240-pin DIMM slots that can support up to 16 GB of
DDR2-400 SDRAM. The dual-channel memory bus requires memory modules
to be installed two at a time.
Serial Attached SCSI/Serial ATA
An Adaptec 9410W SAS/SATA controller is integrated into the X6DHP-3G2 to
provide a Serial Attached SCSI/Serial ATA subsystem that includes four internal
and four external SAS ports. RAID levels 0, 1 and JBOD are supported. The
X6DHP-3G2 also has a slot for a LP ZCR card (AOC-LPZCR1) to supply ZCR
function. The use of a ZCR card in this slot will also provide RAID 5 support.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS/SATA drives.
PCI Expansion Slots
Two riser cards have been preinstalled in the server to support PCI expansion.
The CSE-RR1U-XR riser fi ts into the 100 MHz PCI-X slot #2 to support a standard
size (full-height, full-length) PCI-X add-on card (of either 100 or 66 MHz). The
CSE-RR1U-X fi ts into the 100 MHz PCI-X slot #1 to support one low profi le (half-
height, half-length) PCI-X add-on card (of either 100 or 66 MHz).
An additional two riser cards are included in the retail box as an option to support
x8 PCI-E add-on cards: the CSE-RR1U-EL and CSE-RR1U-ER.