User`s manual

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6014P-32 and
6014P-32R. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 6014P-32/6014P-32R is a high-end 1U rackmount server based
on the SC816A-700/SC816A-R700 1U rackmount server chassis and the X6DHP-
3G2 serverboard, which supports single or dual Intel® Xeon™ processors of up
to 3.60 GHz at a Front Side (system) Bus speed of 800 MHz and up to 16 GB of
DDR2-400 SDRAM memory.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER X6DHP-3G2
serverboard and the SC816A-700/SC816A-R700 chassis, which make up the
SuperServer 6014P-32/6014P-32R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6014P-
32/6014P-32R into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without processor and memory com-
ponents, this chapter will refer you to the appropriate sections of the manual for
their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface