User`s manual

6-4

UPERSERVER 6014P-32/6014P-32R User's Manual

Figure 6-2. Removing the Fan Housing

6-4 Drive Bay Installation/Removal

Accessing the Drive Bays

SAS/SATA Drives: Because of their hotswap capability, you do not need to access

the inside of the chassis or power down the system to install or replace SAS or

SATA drives. Proceed to the next step for instructions.

Note: You must use standard 3.5" high, SAS/SATA drives in the SuperServer 6014P-

32/6014P-32R.

DVD/CD-ROM/Floppy Disk Drives: For installing/removing a DVD/CD-ROM or

ﬂ oppy disk drive, you will need to gain access to the inside of the system by remov-

ing the top cover of the chassis. Proceed to the "DVD/CD-ROM and Floppy Drive

Installation" section later in this chapter for instructions.

Note: Only "slim" DVD/CD-ROM and ﬂ oppy drive will ﬁ t into the 6014P-32/6014P-

32R.