User`s manual

Chapter 7: BIOS
7-9
PCI Confi guration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN (Gigabit- LAN) OPROM Confi gure
Enabling this option provides the capability to boot from GLAN. The options
are Disabled and Enabled.
Onboard SCSI OPROM Confi gure
Enabling this option provides the capability to boot from SCSI. The options are
Disabled and Enabled.
Default Primary Video Adapter
This option allows the user to decide which video adapt is the default primary
video adapter for the system. The options are Onboard and Other.
PCI Parity Error Forwarding
If set to Enabled, NMI signals will be generated when a PCI Parity Error occurs.
The options are Enabled and Disabled.
ROM Scan Order
If set to Onboard First, the Onboard PCI Option ROM will be activated fi rst
before the Add-On Device Option ROM is activated. The options are Add-On
First and Onboard First.
Reset Confi guration Data
If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD)
area. The options are Yes and No.
Frequency for PCIX#1/GLAN, PCIX#2/MASS, PCIX#1/MASS,PCIX#2/
GLAN
This option allows the user to change the bus frequency for the devices installed
in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66 MHz, PCI-X
66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
PCI-X 100MHz Slot#1 w/ZCR, PCI-X 100 MHz Slot#2, PCI-Express
x8 Slot#1, PCI-Express x8 Slot#2
Access the submenu for each of the settings above to make changes to the
following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The
options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled.