Datasheet

5-4

SUPERSERVER 6015C-M3/6015C-MT User's Manual

5-4 I/O Ports

The I/O ports are color coded in conformance with the PC 99 speciﬁ cation. See

Figure 5-2 below for the colors and locations of the various I/O ports.

Figure 5-1. Control Panel Header Pins

Note: The COM2 port is a header on the serverboard, located near the ﬂ oppy con-

nector at the corner of the serverboard. COM2 should be connected to the COM

port at the front of the chassis.

Mouse (Green)

LAN1 LAN2

Keyboard

(Purple)

COM1 Port (Turquoise) VGA Port (Blue)USB 0/1 Ports

Figure 5-2. I/O Ports

NMI

x (Key)

Vcc 5V Stby

Vcc 3V

Vcc 3V Stby

Vcc 3V

Reserved

Reset (Button)

Power (Button)

Ground

x (Key)

Power On LED

IDE/SATA LED

NIC1 LED

NIC2 LED

OH/Fan Fail LED

Reserved

Ground

2 1

20 19

Connecting the Control Panel

JF1 contains header pins for various front control panel connectors. See Figure 5-1

for the pin locations of the various front control panel buttons and LED indicators. All

JF1 wires have been bundled into a single ribbon cable to simplify this connection.

Make sure the red wire plugs into pin 1 as marked on the board. The other end

connects to the Control Panel PCB board, located just behind the system status

LEDs on the chassis.