Datasheet

7-4
S
UPERSERVER 6015C-UR/6015C-U/6015C-NTR/6015C-NT User's Manual
 SATA Port1, SATA Port2, SATA Port3, SATA Port4, SATA
Port5 and SATA Port6
These settings allow the user to set the parameters of SATA Port, SATA Port, SATA
Port3 and SATA Port4. Hit <Enter> to activate the following sub-menu screen for
detailed options of these items. Set the correct confi gurations accordingly. The items
included in the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. The option Auto
will allow the BIOS to automatically confi gure the parameters of the HDD installed
at the connection. Enter a number between 1 to 39 to select a predetermined HDD
type. Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable disk
drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors and 16
Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Channel 0
Master Device via the LBA mode. The options are Enabled and Disabled.