Datasheet

7-16

UPERSERVER 6015C-UR/6015C-U/6015C-NTR/6015C-NT User's Manual

Console Type

This item allows you to choose the console redirection type. The options are VT100,

VT100/8bit, PC-ANSI/7bit, PC ANSI, VT100+ and VT-UTF8.

Flow Control

This item allows you to set the ﬂ ow control for the console redirection. The options

are None, XON/XOFF and CTS/RTS.

Console Connection

This item allows you to decide how the console redirection is to be connected:

either Direct or Via Modem.

Continue CR after POST

This item allows you to decide whether you want to continue with the console

redirection after POST routines. The options are On and Off.

Hardware Monitor Logic

Highlight this and hit <Enter> to see monitor data for the following items:

CPU1 Temperature/CPU2 Temperature/System Temperature

Fan1-Fan8 Speeds

If the Auto Fan Control feature is enabled, the BIOS will automatically display the

status of the fans indicated in this item.

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When the

CPU on-die temperature increases, the fan speed will also increase, and vice versa.

If the option is set to 3-pin fan, the fan speed is controlled by voltage. If the option

is set to 4-pin, the fan speed will be controlled by Pulse Width Modulation (PWM).

Select 3-pin if your chassis came with 3-pin fan headers. Select 4-pin if your chas-

sis came with 4-pin fan headers. Select Workstation if your system is used as a

Workstation. Select Server if your system is used as a Server. Select Disable to

disable fan speed control and allow the onboard fans to constantly run at full speed

(12V). The options are: 1. Disable (Full-speed @12V), 2. Optimized for Servers

w/3-pin, 3.Optimized for Workstations w/3-pin, 4. Optimized for Servers w/4-pin,

and 5. Optimized for Workstations w/4-pin.