User`s manual

Chapter 5: Advanced Serverboard Setup
5-11
X8DTT-F/X8DTT-IBXF/X8DTT-IBQF Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear (See Section 5-8)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN1/2 Enable/Disable Pins 1-2 (Enabled)
JWD1 Watch Dog Enable/Disable/Reset Pins 1-2 (Reset)
Connector Description
COM1 COM1 Serial Port
FAN 1-4 System/CPU Fan Headers
Infi niBand Infi niBand Port (X8DTT-IBXF/X8DTT-IBQF only)
IPMB IPMB Header (for an IPMI Card)
PWR I
2
C Power Supply SMBus I
2
C Header
JF1 Front Panel Connector
JNMI1 NMI (Non-Masked Interrupt) Header
JP10 Onboard 4-pin Power Connector
JPSK1 Internal Speaker/Buzzer Header
JWR1/JWR2 12V 20-pin Power Connectors
JWOL1 Wake-On-LAN Header
LAN1/2 Gigabit Ethernet (RJ45) Ports
IPMI LAN Dedicated IPMI LAN Port
SATA0 ~ SATA5 SATA Ports
SW1 Unit Identifer Switch
T-SGPIO-0/T-SGPIO-1 Serial General Purpose Input/Output Headers
USB0/1, USB 2/3 Universal Serial Bus (USB) Ports 0/1, 2/3
VGA Video Port
LED Description
LE2 Onboard Standby PWR warning LED Indicator
LE4 (Rear) Unit Identifer (UID) LED Indicator
LEB1 Infi niBand Link LED
LEB2 BMC Activity LED
Note: Jumpers not indicated are for test purposes only.