User`s manual

1-4
SUPERSERVER 7046GT-TRF/7046GT-TRF-TC4 User's Manual
Hard Drive/Drive Bays
The SC747 Chassis features eight slots for SAS/SATA drives. These drives are hot
-swappable. Once set up correctly, these drives can be removed without powering
down the server.
Each SC747 Chassis provides three 5.25” peripheral drive bays for fl oppy drives,
DVD-ROM/CD-ROM Drives, or additional hard drives
Front Control Panel
The control panel on the server provides you with system monitoring and control.
LEDs indicate system power, HDD activity, network activity, system overheat, UID
and power supply failure. A main power button and a system reset button are also
included.
Cooling System
The SC747 chassis accepts four system fans and two rear exhaust fans. System
fans are powered from the serverboard. These fans are 4U high and are powered
by 4-pin connectors.
Backplane
Each SC747 chassis comes with a 4U backplane. Depending on your order, your
backplane will accept SAS/SATA. For more information regarding compatible back-
planes, view the appendices found at the end of this manual. In addition, visit our
Web site for the latest information: http://www.supermicro.com.
1-4 GPU Subsystem (7046GT-TRF-TC4 Only)
The 7046GT-TRF-TC4 is a parallel processing multiple-GPU server. It includes
four NVIDIA® Tesla™ C1060 GPUs with multiple x16 non-blocking native Gen2
PCI-Express connectivity that places these systems at the forefront of today's GPU
computing solutions.
Refer to the NVIDIA web site (www.nvidia.com) for details on Tesla GPUs.
Notes:
The GPUs process complex image calculations and then route the data out through
the VGA port on the serverboard.
The C1060 GPU model includes an active heatsink. Its fans work independently of
the system fans and cooling parameters.