User`s manual

Chapter 2: Server Installation
2-11
2-6 Tower Mounting Instructions
The SC747 chassis is shipped with the chassis cover and feet pre-installed. To use
the chassis as a desktop server, no other installation is required.
Use the instructions in this section if you have converted the chassis for rack use
and need to return the chassis to tower mounting.
Installing the Chassis Cover
Installing the Cover
Remove the rack mount ears.1.
Align the cover post with the corresponding holes on the top of the chassis 2.
and place the cover on top of the chassis. The cover should overhang
approximately one-half inch over the front of the chassis.
Slide the chassis cover toward the rear of the chassis to lock the cover into 3.
place.
Chassis Cover
Chassis Feet
Figure 6-6: Adding Chassis Feet and Top Cover
Chassis Rack Mount
Ears