User`s manual

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 7046GT-
TRF/7046GT-TRF-TC4. Installation and maintenance should be performed by
experienced technicians only.
The SuperServer 7046GT-TRF/7046GT-TRF-TC4 is based on the SC747TQ-
R1400B 4U/Tower rackmount server chassis and the Super X8DTG-QF serverboard.
Please refer to our web site for an up-to-date list of supported operating systems,
processors and memory.
The only difference between the SuperServer 7046GT-TRF and SuperServer
7046GT-TRF-TC4 is that the latter includes the nVidia Tesla Graphics Processor
Unit (GPU).
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8DTG-QF serverboard
and the SC747TQ-R1400B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the system into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without the processor and memory components, this chapter will refer
you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
system.
iii
Preface