User`s manual

5-2
SUPERSERVER 7046GT-TRF/7046GT-TRF-TC4 User's Manual
!
Unpacking
The serverboard is shipped in antistatic packaging to avoid electrical static dis-
charge. When unpacking the board, make sure the person handling it is static
protected.
5-2 Serverboard Installation
This section describes how to install the serverboard into the SC747 chassis
system.
Warning: To avoid damaging the serverboard and its components, do not
apply any force greater than 8 lbs. per square inch when installing a screw
into a mounting hole.
I/O Slot Shield Installation
The I/O shield holds the motherboard ports in place. Install the I/O shield before
you install the motherboard.
Installing the I/O shield:
Review the documentation that came with your motherboard. Become familiar 1.
with component placement, requirements, and precautions.
Open the chassis cover.2.
Choose the proper I/O shield for the motherboard you are installing.3.
With the illustrations facing the outside of the chassis, place the shield into 4.
the space provided. Once installed, the motherboard ports will hold the I/O
shield in place.
Figure 5-1: SC747 Chassis I/O Shield
I/O Shield