User`s manual

Chapter 6: Advanced Chassis Setup
6-13
6-6 Installing Hard Drives in the Chassis
Chassis hard drives are mounted in drive carriers to simplify their installation and
removal from the chassis. These carriers also help promote proper airfl ow for the
drive bays.
Installing Hard Drives
Unlock and open the chassis cover.1.
Press the release button to extend the drive tray handle (see Figure 6-14).2.
Using the handle, pull the drive tray out by the handle. The drive is hot 3.
swappable; there are no cables to disconnect.
Remove the screws holding the drive tray to the dummy drive.4.
Drive Tray Handle
Release Button
Figure 6-14: Installing Hard Drives